Industrial Hydrostatic Level Sensor CYB3120 4-20mA

CYB3120 Industrial Hydrostatic Level Sensor

This industrial hydrostatic sensor is designed to measure the height of liquid levels ranging from 0 to 300m (depending on cable length). The sensor is positioned vertically at the bottom of the tank, where it measures the height of the liquid. It subsequently measures the hydrostatic pressure corresponding to the liquid height above the sensor. Note that it can only be used in non-pressurized tanks. The measured liquid must have a viscosity equivalent to that of slightly turbid water.

• Industrial grade
• Test report for each unit
• Suitable for measuring levels in water and water-based media; suitable for drinking water
• The sensor is located at the bottom of the container
• The relative pressure measurement ensures an accurate analog signal and good stability
• Pressure equalization with ambient pressure using a capillary with an integrated filter in the connection cable, which protects the tube from clogging
• Application area: Water, water-based media, suitable for drinking water

Note: It is essential to ensure that no dirt accumulates at the bottom of the tank that would prevent the measuring liquid from reaching the sensor.

Specifications:

• Model: CYB3120
• Output signal: 4-20 mA, 0V-10V, RS485
• Accuracy: 0.1 (custom); 0.25 (typical); 0.5 (max)
• Temperature drift: ±0.02%FS/℃
• Stability: ±0.1%FS/year
• Sensitivity drift: ±0.02%FS/℃
• Measurement range: 0-300m (depending on cable length)
• Power supply voltage: 10-30V DC
• Load resistance: Current type: ≤(U-12)/0.02(Ω)
• Dielectric strength: 100MΩ/250V DC
• Cable length: 2m (with options for 1, 3, 4, 5, 6, 8, 10, 15, 20, 25, 30m)
• Shock resistance: 10g (20-2000 Hz)
• Measuring medium: Liquid compatible with SS316L
• Diaphragm material: SS316L
• Housing material: SS304
• Protection class: IP68
• Sensor operating temperature: -10 ... 65 °C (no crystallization)
• CE compliance: yes