HXYP-6S-MT10S-SH10 10-Cell 42V 30A Li-ION BMS

HXYP-6S-MT10S-SH10 BMS 10-Cell 42V 30A Li-ION Battery Protection Module for Power Tools

Protective and charging module (BMS) for 10 Li-Ion cells with individual monitoring for each cell. Suitable for nominal lithium battery voltages of 3.6V, 3.7V (including 18650 and 26650).


Technical Specifications:

• Model: HXYP-6S-MT10S-SH10
• Charging Voltage: 42V
• Continuous Discharge Current: 30A
• Maximum Discharge Current: 60A
• Overcharge Voltage (per cell): 4.2V±0.025V
• Over-discharge Voltage (per cell): 2.7±0.1V
• Static Current: 30μA
• Overheat Protection: -10℃~+70℃
• Weight: 10 g
• Dimensions: 80x55x20 mm

Note:

Calculation of the upper limit of the operational overcurrent: for a battery rated at 1C, capacity 2000, it equals:
2Ah*1=2A upper operational current limit.
For a 3C battery, capacity 2000, it equals:
2Ah*3=6A upper operational current limit.
For products with current ratings higher than 3A, the discharge rate of the battery must exceed 3C.
If the battery heats up during use, it indicates that the discharge rate is not suitable for the application. In this case,
it should not be used for an extended period; otherwise, the battery will be damaged quickly.