MTSKR1905WF IP67 Remote Control for Electric Skateboards
MTSKR1905WF IP67 Remote Control for Electric Skateboards
The MTSKR1905WF IP67 remote control features 2.4GHz bidirectional communication, a 20-meter range, and a long-lasting battery, making it ideal for electric skateboarding. More
126 EUR
incl. VAT
The MTSKR1905WF IP67 remote control features 2.4GHz bidirectional communication, a 20-meter range, and a long-lasting battery, making it ideal for electric skateboarding. More
MTSKR1905WF Electric Skateboard Remote Control
Features
- Bidirectional communication at 2.4GHz, 40 channels, with automatic frequency modulation to avoid interference;
- Communication range of 20 meters; 16 hours of operation time after a full charge;
- Built-in 420mAh lithium battery with USB port for charging;
- Color OLED display 128x64
- Easy switching between fast and slow riding;
- Automatic throttle calibration at power on;
- Communication loss alert between the remote and receiver; if the signal is lost for 5 minutes, the remote automatically turns off to save battery;
- If signal loss occurs between the remote and the receiver, the receiver disables the throttle for rider safety;
- Memory code function, allows quick linking between remote and receiver on startup;
- Switching function for forward and backward riding *
Note: Features marked with an asterisk * are available with the MTDU30A dual controller.

Specifications:
- Model: MTSKR1905WF (V2), enhanced waterproofing and signal strength
- Remote battery: 3.7V 420mAh
- Frequency: 24 GHz
- Control mode: Esk8/Esurf
- Output power: 7 dBm
- Working current: 26 mA
- Operating time: 16 hours
- Control distance: >20 meters
- Display: 128 x 64 OLED
- Wireless charging
- Signal format: supports standard PWM (PPM) and UART, output range from 10%-20%, compatible with ESC/VESCTOOL
- Three adjustable speed modes
- Speed and distance display
- Battery capacity display for remote and skateboard
- Dual trigger control
- Compatible with: VESC4/VESC6/FOCBOX/PWM ESC
- Throttle output: PWM 1ms-2ms 100Hz
- 30V 3A Mechanical relay
- 20V 2A transistor relay
- Extended antenna: yes
- Waterproof rating: IP67 with 2 layers of nano-coating
- Receiver weight: 11g
- Transmitter weight: 96g

Manual: https://cdn.shopify.com/s/files/1/0089/3065/6320/files/2023_Maytech_MTSKR1905WF_Manual_V2.0_36fd4e91-a6c4-4863-9a59-d8542a414f97.pdf
How to display voltage, current, RPM, temperature on Maytech Remote with TX and RX?
Usage Tips:
1. Rinse the remote in freshwater after using it in saltwater.
2. The remote PCB is sealed with waterproof nano-coating and double protected with glue. The remote screen is sealed with waterproof nano-coating, not glue. When used in water, water may get between the outside and inside screens. This will not affect functionality. When not in use, please store it in a dry place to let it dry slowly.
3. Keep the remote dry while charging.
4. The receiver is not waterproof. Please keep the receiver in a dry place.
5. Since customers' usage situations may vary, some might need to replace the antenna with a longer one. If you mount the receiver deep in your board, we recommend changing to a longer 2.4GHz antenna and placing it near the top cover of your board for better signal.
6. When soldering, ensure that the two pins do not touch each other, as this may burn out the receiver.
7. The 1m and 3m extended antennas are not waterproof.
2. The remote PCB is sealed with waterproof nano-coating and double protected with glue. The remote screen is sealed with waterproof nano-coating, not glue. When used in water, water may get between the outside and inside screens. This will not affect functionality. When not in use, please store it in a dry place to let it dry slowly.
3. Keep the remote dry while charging.
4. The receiver is not waterproof. Please keep the receiver in a dry place.
5. Since customers' usage situations may vary, some might need to replace the antenna with a longer one. If you mount the receiver deep in your board, we recommend changing to a longer 2.4GHz antenna and placing it near the top cover of your board for better signal.
6. When soldering, ensure that the two pins do not touch each other, as this may burn out the receiver.
7. The 1m and 3m extended antennas are not waterproof.
Package Contents:
















