ST-Link V2 USB ICD Programmer for STM8 and STM32

ST-Link V2 USB ICD Programmer for STM8 and STM32

Description:

• Compatible with STM32 32-bit ARM Cortex MCU
• Power and communication through USB cable.
• Read, write, and verify microcontrollers.
• Chip location demonstration on the board.
• ICSP output on cable.
• Support for Windows 98, 2000, XP, Vista, 7 (32 and 64 bit)...
• Easy-to-use control software.
• Power and communication indication using 2x LEDs.
• Manufacturer: China, clone

The ST-LINK/V2 is an in-circuit debugger and programmer for STM8 and STM32 microcontroller families. It is used for communication with any STM8 or STM32 microcontroller located on an application board using a single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interface.

The ST-LINK/V2-ISOL further offers digital isolation between the PC and the target application board. This model withstands voltages up to 2500 VRMS.

STM8 applications communicate through a USB full-speed interface with STVisual Develop (STVD) or ST Visual Program (STVP) software.

STM32 applications communicate with integrated development environments Atollic, IAR, Keil, or TASKING using a USB full-speed interface.

Main Features

• 5 V power supplied via USB connector.
• USB 2.0 full-speed compatible interface.
• USB standard A to mini B cable.
• Specific features for SWIM.
• Application voltage support of 1.65 V to 5.5 V on SWIM interface.
• Support for low-speed and high-speed SWIM modes.
• SWIM programming speed: 9.7 Kbytes/s at low speed and 12.8 Kbytes/s at high speed.
• SWIM cable for connection to the application via vertical (ref: 284697 or 214017) or horizontal connector (ref: 214012).
• SWIM cable for connection through pin header or connector with a 2.54 mm pitch.
• Specific features for JTAG/serial wire debugging (SWD).
• Application voltage support of 1.65 V to 3.6 V on JTAG/SWD interface with 5 V tolerant inputs.
• JTAG cable for connection to standard 20-pin JTAG connector with a 2.54 mm pitch.
• Support for JTAG.
• Support for SWD and serial wire viewer (SWV) communication.
• Support for direct firmware update (DFU).
• LED indicator that blinks during communication with PC.
• Operating temperature 0 to 50 °C.
• 2500 VRMS high isolation voltage (only ST-LINK/V2-ISOL).

Package includes:

• 1x ST-LINK/V2 programmer
• 1x USB cable
• 3x connection cables

WARNING: This is a DIY programmer for advanced users. It requires ST-Link V2 USB drivers to function. It is supplied WITHOUT programming software. It is the user's responsibility to search for, install, and set up the software. There are many free applications compatible with this programmer. Links to these applications are not guaranteed and provided without warranty and support.

More Information:

More product information

ST-Link V2 USB drivers:

Download ST-Link V2 drivers

Software: ST Visual Programmer (STVP)