USB programmer EEPROM Flash BIOS with CH341A - 450+ Supported Chips
EEPROM Flash BIOS USB Programmer with CH341A Chip for 24Cxx (I2C) and 25Cxx (SPI)
- Model: XTW100
- Currently supports over 450 chips from 22 manufacturers.
- Supports 24Cxx via I2C and 25Cxx (25xx SPI flash) via SPI, including in-circuit use with a clip. This is not an AVR ISP programmer.
- Many common CH341A mini boards power the socket from 3.3 V but drive the data lines from 5 V. Check levels before using a 3.3 V-only chip; a hardware modification is often required (see the link below).
- New software versions are freely available online
- CE certified by testing agency and meets CE requirements
- Supports: Windows 2000, XP, Vista, 7, 8, 8.1, 10 and 11 (32/64-bit) with the CH341PAR driver. Not Windows 98 or Windows ME.
- See the list of supported chips here: http://www.neven.cz/user/7262/upload/ftp_client/CH341A_supported_chips.txt
Modification for 3.3V: https://www.chucknemeth.com/3-3v-ch341a-modification/
WARNING: This is a DIY programmer, intended for advanced users who know how to use it. EEPROM and SPI-flash tools talk to the CH341A in SPI/I2C (parallel/MEM) mode over USB (VID 1A86), using the WCH CH341PAR driver or a WinUSB/libusb driver. The CH341SER virtual COM (UART) driver is the wrong interface for 24Cxx/25Cxx programming and is not required. It is provided WITHOUT programming software. It is the user's responsibility to find, install, and set up the programming software. There are several free programming applications that are compatible with this programmer (for example AsProgrammer, NeoProgrammer, and flashrom). Below are links to some of them. These links are provided in good faith, WITHOUT any warranties or support.
WARNING: this list of supported chips is provided by the manufacturer. Please do not contact us with inquiries about chips that are not listed, as we cannot guarantee their support.
Software and Drivers: http://uloz.to/xDERAMVb/ch341a-programming-software-rar
Official SPI/I2C/parallel driver (use this one): https://www.wch-ic.com/downloads/CH341PAR_ZIP.html (CH341PAR). The old wch.cn CH341SER link is the USB-to-serial driver and is not the programmer interface.






